This toolbar makes precise in-ground turns at the end of each field pass, allowing you to make the most of your manure and leave the field with the farmer’s approval when the job is done. The tower design and position allow for those smooth in-ground turnarounds by reducing resistance on the bar as it ‘corners’ at the end of the field.

The tower is closely aligned with the center section flotation tires, which results in improved turning in the field as well as clean hose routing across the toolbar, maximizing flow and even distribution from the manifold and reducing the likelihood of Bumblebee hose kinking.

Titan’s forward-folding design allows for an efficient narrow transport width. Now, you can easily go from ‘work’ position to ‘transport’ position within minutes. Titan’s folded travel width of 12’ to 12.5′ (*model dependent) makes roads and narrow field openings more accessible.

The Phantom unit precisely injects manure 4-6” into the ground using its 22” main coulter blade and a 17” single closure blade. This is the ideal nutrient depth to promote crop growth, and ultimately increase yields. Not only that, but because there is little to no manure left on top of the ground, manure odor is reduced. Your bank account and your neighbors will thank you.

At a glance the Phantom injection unit benefits (or see all the details here):

• Low maintenance
• Reduced unit clogging/down-time
• Minimal soil disturbance
• Reduced streaking in the field
• Even nutrient coverage throughout the field, precise nutrient placement, no additional tillage required
• Versatile spacing configurations

The Phantom unit injects liquid manure into the ground so precisely that you might not even be able to tell it went through the field (hence its name). Minimal soil disturbance allows the ground to maintain its topsoil profile, reducing erosion and liquid manure runoff.

This unit can handle a variety of gallons per acre (GPA) depending on Phantom configuration, adding versatility to its performance. Achieve rates from 2,500 up to 20,000+ while always delivering even coverage throughout the field.

The Flux Manifold’s hydraulic gate valve can be opened to clean out the manifold on the go without leaving the tractor cab, or if you are outside the cab, you can easily access and clean out the blockage. The Flux features a lift assist handle that makes removal of the lid quick and simple, should you need to get inside to take a closer look.

It’s automatic. It’s systematic. It’s convenient maintenance.

Taking the effort out of routine maintenance when time is of the essence. This upgrade option reduces maintenance by delivering lubricant to various grease points throughout the entire toolbar on a timed setting. Not only does this save time, but it also saves wear and tear on your bar. Some of the grease locations include but are not limited to: The Phantom unit main pins, front parallel links, lift cylinders, hose pipe swivel, hose swivel, and float hinges.