Infinity Series Boom Truck | Bazooka Farmstar Pump Units

REACH A NEW
LEVEL OF EFFICIENCY

The Infinity Series triple fold boom truck incorporates innovative features that will make pumping liquid manure more efficient, convenient, and safe for you and your crew.

REQUEST A DEMO OR CUSTOM QUOTE

FEATURES

The Infinity Series leads the market in reach, ease of travel, pumping capacity, and performance. Winning.

Infinity Series Manure Injection Boom Truck

Increased Uptime

The force-feeding, triple fold boom truck increases uptime with its simple set up and high gallon capabilities. Pull additional equipment, such as booster pumps or smaller hose reels, to your next site and be set up and pumping within a matter of minutes.

Centralized Function Location

Controlling all hydraulic functions from a single, centralized location provides a professional level of safety, as well as an added convenience to the operator.

Bazooka Farmstar Infinity Series Pump Unit

Up to 3,700 GPM Capability

Achieve up to 3,700 GPM. We equip all Infinity Series Boom Trucks with our 18" Bazooka Farmstar submersible pumps.

Bazooka Farmstar Infinity Series Triple Fold Design

Robust Design

This triple-fold design simplifies pumping from hard to access confinement buildings, slurry storage, & deep lagoons due to its accurate distance control, extreme depth, and maneuverability. Reach lengths from 65’-85’.

Stainless Steel Plumbing

The Infinity Series plumbing is constructed with durable stainless steel and corrosion resistant HDPE. #reliable

This truck is built with durable materials for a reliable, high-performance product that you can depend on.

Now, let’s get down to the nitty-gritty.

MODELS

IS-65

65 FT Boom Reach | 8″ Hose
18″ Bazooka Farmstar Submersible
Hydrostat Wet Kit

IS-65-H

65 FT Boom Reach | 10″ Hose
18″ Bazooka Farmstar Submersible
Hydrostat Wet Kit

IS-85-H

85 FT Boom Reach | 10″ Hose
18″ Bazooka Farmstar Submersible
Hydrostat Wet Kit

SPECIFICATIONS

STANDARD ACROSS ALL INFINITY SERIES MODELS

Triple fold boom design for accurate distance control and maneuverability
The boom structure and base are mounted on the front of the truck
The boom plumbing is constructed with stainless steel and wear-resistant poly pipe for extreme durability and low maintenance design
Boom is constructed with high-strength steel
Heavy-duty telescoping outriggers for stability and to minimize strain on the truck frame
Custom boom cylinders are hard plumbed to locking valves for fail-safe operation
‘Cockpit’ style control in a highly visible, safe location
- Controls all engine, hydraulic, and system statuses in one place
- 10-bank valve open-loop system with high capacity hydraulic oil cooler
Equipped with hydrostat-driven, 18″ Bazooka Vortex submersible pump with 8″ discharge
5′ section of rubber hose near the intake for easy cleanout or feeding pump by other means
8″ pig launcher with chained cap for safety precautions
Robust diamond plate floor
2 ladder locations
Equipped with a 400-gallon fuel tank
Grease bank located on boom base for hard to reach pivot pins
Steel tube bumper with 2″ receiver hitch or rear for pulling additional equipment
- Please review local regulations for towing requirements

OPTIONS ACROSS ALL INFINITY SERIES BOOM TRUCK MODELS

500-gallon fuel tank
Bumper upgrades
- Ag-7 drawbar
- Ag-7 pintle hitch
Boom remote control – Belly pack
Rear-mounted boom controls
Krohne flowmeter

INFINITY SERIES BOOM TRUCK ENGINE REQUIREMENTS

Engine must follow J1939 protocol (preferred) or mechanical injection
J1708 and J1587 protocol engines can only be run with manual over control boxes
- If the specified engines above are not used, (not recommended) the manual box must be supplied by the customer and the engine must be run with the control box installed prior to the engine’s delivery to Bazooka Farmstar

65′ INFINITY SERIES BOOM TRUCK STANDARDS

Swiveling discharge
Weight – system adds approximately 30,000 lbs. to truck
Length behind cab – 25′
Deck width – 100″
Height – 13′
65′ boom length (63′ reach from driver’s side of the truck)

65′ INFINITY SERIES BOOM TRUCK REQUIREMENTS

Front axle with 12,500 lb. minimum capacity
Rear tandems must be able to support 33,000 lb. minimum
Double frame rail construction
175″ from the center of tandems to the rearmost point of the cab/exhaust stacks
Frame must extend 7′ behind tandems
- Frames can be stretched for an additional fee
- Extra charges may be incurred if the truck needs excessive modification for mounting

65′ INFINITY SERIES BOOM TRUCK HYDRAULIC PACKAGES

IS-65 (8″ Hose)
- Main Pump – Cornell 6NHTB or 6819MP
- Engine – JD 13.5L 600 HP with rear pump drive
- Submersible Pump – 18″ Bazooka Vortex Pump
- Motor – 108cc SAE C Flange
- Hydraulic Pump – 100cc Hydrostat
IS-65-H (10″ Hose)
- Main Pump – Cornell 6819MPC
- Engine – JD 13.5L 600 HP or CAT C18 with rear pump drive
- Submersible Pump – 18″ Bazooka Vortex Pump
- Motor – 162-165cc SAE D Flange
- Hydraulic Pump – 100cc Hydrostat

85′ INFINITY SERIES BOOM TRUCK STANDARDS

8″ discharge located near the rear passenger side
Weight – system adds approximately 36,000 lbs. to customer supplied truck
Length behind cab – 38’
Deck width – 100”
Height – 13’
85′ boom length (83′ reach from driver’s side of the truck)

85′ INFINITY SERIES BOOM TRUCK REQUIREMENTS

Front axle with 18,000 lb. minimum capacity
Rear tandems must be able to support 42,000 lb. minimum
- Tag axle or special permitting may be required
Double frame rail construction
Frame height no greater than 40″ (top of rear frame rails to ground)
Suspension needs the ability to adjust tension/height of driver’s side due to offset loading
Requires 175” from the center of tandems to rearmost point of cab/exhaust stacks
Requires a 10K steerable drop tag axle 70″ behind the rearmost tandem axle
(center to center)
Frame must extend 30’ behind the rearmost point of the cab
- Frames can be stretched for an additional fee
- Extra charges may be incurred if the truck needs excessive modification for mounting

85′ INFINITY SERIES BOOM TRUCK HYDRAULIC PACKAGES

Main Pump – Cornell 6819MPC
Engine – JD 13.5L (max 600 HP) or CAT C18 (max 780 HP) with rear pump drive
Submersible Pump – 18″ Bazooka Vortex Pump
Motor – 165cc SAE D Flange
Hydraulic Pump – 100cc Hydrostat

TEST DATA

This data was taken when pumping water with an 80′ Infinity Series Boom Truck equipped with a 600 HP John Deere engine.

2,860 GPM @ 203 PSI
3,000 GPM @ 190 PSI
3,300 GPM @ 165 PSI
3,480 GPM @ 144 PSI

We know, there is a lot to consider when building an Infinity Series Boom Truck but don’t worry, we can help you find your perfect fit.

ADVANTAGES

Accomplish more in less time

Versatile & reliable

Reduced set up time

Want to see the Infinity Series in action?
SCHEDULE YOUR DEMO, TODAY!

ARE YOU READY TO DEDICATE
YOURSELF TO GREATNESS?
Let’s Talk

JOIN THE GAMECHANGERS

GET A WHIFF OF OUR LATEST SH*T.

Infinity Series