The 32′ Renegade 2 comes standard with a 125 CC hydrostat motor, reaching up to 2,900 GPM when paired with a 173 HP engine and 15″ Bazooka Farmstar submersible pump. The high-performance submersible pump features a heavy-duty bearing housing with no mechanical seal — easy maintenance, less downtime, more time pumping.

The pump also features a dual-sealed grease chamber and a 4-bolt quick-access suction cover for next-level maintenance accessibility, so your crew spends less time servicing equipment and more time on the job site.

The 32′ triple-section boom is built for maneuverability and accurate control, with 8″ through-the-boom plumbing that minimizes external hoses and reduces setup time. That translates to:

• 13′ below-grade pumping depth
• 28′ maximum reach from the side of the trailer at ground level
• 15′ 6″ maximum slurry height

Whether you’re dewatering a retention pond, bypassing a lift station, or transferring sediment slurry on a job site, the Renegade 2’s reach gets you where the material is.

Dual, rotating agitation nozzles provide agitation while pumping. Keep one or both nozzles open while pumping to continue agitation. 

With our optional rechargeable remote controls, you can place the pump and operate the agitation, pump, force-feed, and tank fill functions without leaving your truck or tractor cab. Talk about convenience. 

• We also offer tank fill remote fobs that allow each tank operator to remotely switch from agitate to fill mode without shutting down or leaving their tractor cab when they pull up under a load stand. And guess what? There’s no limit to how many fobs you can connect to one Renegade. You can thank us later. 

• The boom remote controls all boom movement functions. (Up, down, in, out, and left/right nozzles) Not only that, but the buttons on the main remote are proportional, so the more pressure you apply, the quicker the function occurs. Proportional functionality allows you to work safely by having extreme control over your Renegade.

• High-ground clearance trailer design 
• Four hydraulic downriggers for stability 
• Single location operator station located in the rear of the trailer 
• Gooseneck or bumper hitch options 
• Mounted hose reel upgrade for 100’ of 10” hose 

Set downriggers without starting the engine. 12VDC hydraulic backup pump can be used for boom function if engine is inoperable.