Home > Products > Grain Augers

Grain Moving Systems and Grain Augers

Here it is: the toughest, hardest-working line of grain moving equipment in the world. It’s a whole system of standard components that fit together like they were custom made for your operation. Day after day, Bazooka keeps it moving!

Portable Bin Sweep

This bin sweep works to the floor of a in about 1/4 revolutions and the balance of grain is removed in one to two revolutions.

Sweep Size Flighting Flighting Shaft Bin Sizes
6″ 4″ OD x 11 Ga. Flighting 1.5″ OD x 1.25″ ID 18′ – 36′
8″ 5.25″ OD x 11 Ga. Flighting 1.5″ OD x 1.25″ ID 18′ – 48′
10″ 9″ OD x 3/16″ Flighting 23/8” OD x 2″ ID 30′ – 75′

Accessories

  • Stabilizer Wheel (Standard on 8″ in 30′, 36′, 42′, and 48′ lengths. Standard on all 10″ lengths.)

 

Externally Powered Bin Sweep

Sweep Size Hopper Size Tube Unloading and Sweep Flighting Assembly Bin Sizes
6″ 20.5″ x 20.5″ x 12″ Deep 6″ OD x 16 Ga. Galv. 51/4” OD x 11 Ga. Flighting on 1.5″ OD Shaft 18′ – 36′
8″ 20.5″ x 20.5″ x 12″ Deep 8″ OD x 14 Ga. Galv. 7″ OD x 10 Ga. Flighting on 1.5″ OD Shaft 18′ – 48′
10″ 20″ x 20″ x 14″ Deep 10″ OD x 12 Ga. Galv. 9″ OD x 3/16″ Flighting on 23/8” OD Shaft 30′ – 75′

Accessories

  • Quick Connect Flange Clamp
  • Stabilizer Wheel (Standard on 8″ in 30′, 36′, 42′, and 48′ lengths. Standard on all 10″ lengths.)

 

Bin Hopper and Unloading Tube with Flight Assembly

Size Type Hopper Size Tube Flighting Assembly Bin Sizes
6″ Drying floor or aeration installations 13.5″ x 13.5″ x 13″ Deep 6″ OD x 16 Ga. Galv. 5.25″ OD x 11 Ga. Flighting on 1.5″ OD Shaft 18′ – 36′
6″ Concrete slab installation 13.5″ x 13.5″ x 7.25″ Deep
8″ Drying floor or aeration installations 13.5″ x 13.5″ x 13″ Deep 8″ OD x 14 Ga. Galv. 7″ OD x 10 Ga. Flighting on 1.5″ OD Shaft 18′ – 60′
8″ Concrete slab installation 13.5″ x 13.5″ x 9.25″ Deep
10″ Drying floor or aeration installations 20″ x 20″ x 14″ Deep 10″ OD x 12 Ga. Galv. 9″ OD x 3/16” Flighting on 23/8” OD Shaft 30′ – 75′
10″ Concrete slab installation 13.5″ x 13.5″ x 11.25″ Deep

Accessories

  • Quick Connect Flange Clamp
  • Intermediate Bin Wall Hopper with Side Gate
  • Intermediate Concrete Hopper (Standard on 10″)
  • Bin Wall Flange
  • Intermediate Bin Wall Hopper

 

25 Degree Angle Powerhead

Keeps grain moving up the incline as fast as it comes from the bin! Use the extensions to increase discharge height.

Size Tube Flighting Assembly Bin Sizes
6″ to 8″ 8″ OD x 14 Ga. Galv. 7″ OD x 10 Ga. Flight on 1.5″ OD Shaft 18′ – 36′
8″ to 10″ 10″ OD x 12 Ga. Galv. 9″ OD x 3/16″ Flight on 23/8” OD Shaft 18′ – 60′
10″ to 12″ 12″ OD x 10 Ga. Galv. 11″ OD x 3/16″ Flight on 23/8” OD Shaft 30′ – 75′

Accessories

  • Quick Connect Flange Clamp
  • Discharge Spout

 

Adjustable Angle Adapter

Size Power Unit Required Bin Sizes
6″ H-81 or C-802 | 8″ Units with 1.25″ ID Center Shaft 18′ – 36′
8″ HC-100 or C-1003 | 10″ Units with 2″ ID Center Shaft 18′ – 60′
10″ HC-120 or C-1200 | 12: Units with 2″ ID Center Shaft 30′ – 75′

 

Vertical Powerhead

Horizontal Tube Horizontal Flighting Vertical Tube Vertical Flighting Vertical Height Bin Sizes
6″ 51/4” OD x 11 Ga. Flighting on 1.5″ OD Shaft 8″ OD x 14 Ga. Galv. 7″ OD x 10 Ga. Flighting on 1.5″ OD Shaft 14’10” or 19’10” 18′ – 36′
8″ 7″ OD x10 Ga. Flighting on 1.5″ OD Shaft 18′ – 48′

Accessories

  • Quick Connect Flange Clamp

 

Horizontal Powerhead

Size Tube Flighting Assembly Bin Sizes
6″ 6″ OD x 16 Ga. Galv. x 18″ Long 51/4″ OD x 11 Ga. Flighting on 1.5″ OD Shaft 18′ – 36′
8″ 8″ OD x 14 Ga. Galv. x 18″ Long 7″ OD x 10 Ga. Flighting on 1.5″ OD Shaft 18′ – 60′
10″ 10″ OD x 12 Ga. Galv. x 24″ Long 9″ OD x 3/16” Ga. Flighting on 23/8” OD Shaft 30′ – 75′

Accessories

  • Quick Connect Flange Clamp

 

D/DR Series: Distributing Augers

The versatile conveying system with positioned outlet fill a multiple bin installation or by using inlet hoppers along the tube, distributing augers can be used for unloading. And, since grain flow can be reversed, you get even greater versatility!

Size Tube Drive Type Basic Length Power Required Capacity* & RPM
6″ 6″ x 16 Ga. Galv. Cast Iron Drive Sheave and 8″ Section Belt 21′ – 196′ 1-15 HP Up to 750 BPH @ 340 RPM | Up to 890 BPH @ 404 RPM
8″ 8″ x 14 Ga. Galv. 3:1 Chain Reducer 10 HP Cast Iron Drive Sheave and “B” Section Belts 20′ – 200′ 1-15HP Up to 895 BPH @ 169 RPM | 1265 BPH @ 239 RPM | 1615 BPH @ 305 RPM

*Capacities (or horsepower) may vary with type and condition of grain, auger RPM, type and amount of exposed flighting and degree of incline.

Accessories

  • Flow Thru Intake Hopper
  • Outlet with Slide Gate
  • Rectangular-Square Adaptor
  • Outlet Assembly with Slide Gate
  • Cable Control Kit
  • Inlet
  • 45 Degree Square Elbow
  • Two-Way Pan Valve
  • Three-Way Valve
  • Square to Round Adaptor
  • Square to Round Flanged Adaptor
  • Mounting Bracket

 

H Series: Horizontal, Vertical, or Inclined Augers

These augers pull grain from an intake to a single discharge without intermediate bearings. It is considered the most versatile augers in any feed and grain system.

Size Basic Length Tube Flighting Flighting Shaft Drive Capacity*
6″ 6′, 11′, 16′, & 21′ 6″ OD x 16 Ga. Galv. 53/16” OD x 11 Ga. 1.5″ OD x 1.25″ ID 14″ OD Cast Iron Sheave and “B” Section Belts Up to 1170 BPH
8″ 8″ OD x 14 Ga. Galv. 7″ OD x 10 Ga. Up to 2820 BPH

*Capacities (or horsepower) may vary with type and condition of grain, auger RPM, type and amount of exposed flighting and degree of incline.

 

HC Series: Reduced Pitch Augers

Choose your pitch, extensions, and accessories to create the perfect auger for your needs. Reduced pitch flighting is preferred for handling moisture grain.

Size Basic Length Flighting Flighting Shaft Drive Capacity
6″ 3.5′ w/ choice of pitch 53/16” OD x 11 Ga. 1.5″ OD x1.25″ ID 14″ OD Cast Iron Sheave, “B” Section Belt(s) Up to 1170 BPH
8″ 7″ OD x 10 Ga. Up to 2820 BPH
10″ 6.5′, 11.5′, 16.5′, and 21.5′ w/ choice of pitch 9″ OD x 3/16″ 23/8” OD x 2″ ID 19″ OD Cast Iron Sheave “3V” Section Belts Up to 4515 BPH
12″ 11″ OD x 3/16″ Up to 8200 BPH

*Capacities (or horsepower) may vary with type and condition of grain, auger RPM, type and amount of exposed flighting and degree of incline.

Options

  • 1/2 Pitch
  • 3/4 Pitch
  • Full Pitch
  • Extension sections available in 7.5′, 10′, 15′, and 20′ lengths

Accessories

  • Intake Support
  • Intake Hopper
  • Flow Thru Intake Hopper
  • Mounting Brackets
  • Tube Splice
  • 30, 45, and 90 Degree Discharge Spouts
  • 45 Degree Square Elbow
  • 45 Degree Adjustable Elbow
  • Two-Way Pan Valve
  • Three-Way Valve
  • Square to Round Adaptor
  • Square to Round Flanged Adaptor
  • Spouting

*Not all accessories available for all auger sizes.

 

Bulk Tank Unloaders

These augers can be used in any horizontal, inclined, or vertical position and are economical for permanent installation as a bulk tank or subfloor auger. Portable applications include unloading trucks to bins, bins to trucks, or bins to mills.

Size Basic Lengths Tube Flighting Assembly Drive Capacity*
6″ 5′, 7.5′, 10′, and 15′ 6″ OD x 16 Ga. Galv. 53/16” OD x 11 Ga. 12″ OD “B” Section Pressed Steel Sheave Up to 780 BPH @ 45° | Up to 1040 BPH @ Horiz.
8″ 10′, 15′, and 20′ 8″ OD x 14 Ga. Galv. 7″ OD x 10 Ga. 12″ OD “B” Section ≤15′ and 14″ OD “B” Section 20′-50′ Up to 1860 BPH @ 45° | Up to 2480 BPH @ Horiz.

*Capacities (or horsepower) may vary with type and condition of grain, auger RPM, type and amount of exposed flighting and degree of incline.

Options

  • Extensions available in 10′, 15′, and 20′ lengths
  • Mounting Bracket
  • Flexible Tube Spout
  • Discharge Spout

 

Bin Roof Augers

Size Hopper Tube Flighting Assembly Drive Capacity*
6″ 19.5″ L x 16″ H x 18″ W 6″ OD x 16 Ga. Galv.  53/16” OD x 11 Ga. 14″ OD Cast Iron Sheave, “B” Section Belt(s)  Up to 975 BPH @ 30°
8″ 19.5″ L x 18″ H x 18″ W 8″ OD x 14 Ga. Galv.  7″ OD x 10 Ga.  Up to 2070 BPH @ 30°
10″  24″ L x 24″ H x 24″ W 10″ OD x 12 Ga. Galv. 9″ OD x 7 Ga. 19″ OD Cast Iron Sheave, “3V” Section Belt(s)  Up to 3770 BPH @ 30°

*Capacities (or horsepower) may vary with type and condition of grain, auger RPM, type and amount of exposed flighting and degree of incline.

Available Lengths

Available Lengths Recommended for Bin Diameter
6″ & 8″ 10″
11′ N/A 21′
13.5′ N/A 24′
16′ N/A 27′
18.5′ N/A 30′
21′ 21′ 36′
26′ 26′ 42′
28.5′ 31′ 48′
36′ 36′ 60′

 

 

/* */